Looking for a Rewires Electrician?

1) Home Rewires and Consumer Unit Upgrades in Leeds, Harrogate, Wetherby and Boston Spa

We recently completed a full rewire on a lived-in 4-bedroom semi-detached home in West Park, Leeds. It was a bit different to a standard rewire because the homeowner was moving towards a fully electric home, removing the need for gas heating and hot water.

That meant the electrical design had to be planned properly from the start. We allowed for electric radiators in each room, designed the circuits to avoid overloads and nuisance tripping, and made sure that if one radiator ever developed a fault, it wouldn’t take out other parts of the home or leave the property without heating in winter.

I’ve been carrying out rewires and consumer unit upgrades for 21 years, and this is where experience matters. A good rewire isn’t just about replacing old cables. It’s about designing an electrical system that works safely for how the home is used now, and how it may be used in the future.

2) Rewires and Fuse Box Upgrades Done Properly

If you’re looking for a rewire in Leeds, or comparing quotes for a consumer unit upgrade, it’s likely that you already know the work needs doing. You may have old wiring, limited sockets, an outdated fuse box, regular tripping, or plans to renovate.

In most cases, the best time to rewire is before major decoration, a new kitchen, new flooring or a renovation. It can still be done in a lived-in home, but it needs careful planning, proper protection and clear communication.

We carry out:

• Full house rewires
• Partial rewires
• Consumer unit upgrades
• Fuse box replacements
• Electrical installation testing
• Certification and notification
• Electrical design for modern homes
• Circuits for electric heating, EV chargers, garden power and future solar readiness

We cover rewires and consumer unit upgrades in Leeds and surrounding areas, Harrogate, Wetherby, Boston Spa and nearby villages.

3) A Recent Rewire in West Park, Leeds

The West Park project is a good example of how much thought can go into a proper rewire.

The homeowner was transitioning to a fully electric property. This meant the electrical system needed to support electric radiators throughout the house, with future plans for solar and battery storage.

We designed the circuits carefully so the heating load was properly spread across the installation. This helps prevent circuit overload and nuisance tripping.

It also means that if one electric radiator ever develops a fault, it can be isolated without affecting unrelated circuits. That matters in winter, because a badly designed system can leave a home cold or difficult to use.

The property was lived in throughout the work, so keeping the home safe, clean and usable was a major part of the job.

We used:

• Carpet protection
• Adhesive-backed dust protection for soft furnishings
• Correx boards to protect hard floors
• Careful staging so the existing system stayed live until the changeover was ready

The project was completed on time and on budget.

4) The customer later left this review on our Which? Trusted Trader page:

“Excellent Professional Trustworthy Work completed on time. We had the entire house rewired. The work was excellent, with excellent lines of communication and with extreme attention to detail. We have used SmartOhm three times already, each time with excellently produced professional work. We are extremely happy and fully recommend SmartOhm for all electrical work!”

That kind of feedback matters because rewiring is disruptive by nature. The difference is how well it is planned and managed.

5) What’s Involved in a House Rewire?

A rewire replaces old or unsuitable electrical cabling, accessories and circuits with a modern installation designed around the way you use your home.

Depending on the property, this may include:

• New socket circuits
• New lighting circuits
• New consumer unit
• Smoke alarm circuits
• Kitchen appliance circuits
• Electric heating circuits
• Outdoor power supplies
• Internet and smart home cabling
• Future provision for solar, battery storage or EV charging

A full rewire usually involves lifting floorboards, chasing walls, routing cables, installing new back boxes, fitting sockets and switches, then testing and certifying the installation.

It’s not the kind of work you want rushed.

The design stage is just as important as the installation itself.

6) Consumer Unit Upgrades and Fuse Box Replacements

A consumer unit upgrade, sometimes called a fuse box replacement, is often needed when the existing board is old, lacks modern protection, or cannot safely support planned electrical work.

A modern consumer unit may include protection such as RCDs, RCBOs and surge protection, depending on the installation requirements.

Before replacing a consumer unit, we assess the existing wiring. This is important because fitting a new board can sometimes reveal existing faults that the old fuse box never detected properly.

That’s why we don’t treat fuse box upgrades as a quick swap without proper checks.

We’ll explain what’s needed, test the installation and certify the work correctly.

7) Our Process

We keep the process clear so you know what to expect before committing.

1. Initial Enquiry
You contact us by phone or through the website. We’ll have a short discussion about what you’re looking for, whether it’s a full rewire, partial rewire or consumer unit upgrade.

2. Quote Visit
We arrange a visit to assess the property and understand the requirements properly.

We’ll look at the existing installation, discuss your plans and check what needs upgrading.

3. Detailed Proposal and Quotation
We provide a detailed proposal and quotation so you can see what’s included.

For rewires, this is especially important because specification makes a big difference.

4. Booking the Work
Once you’re happy, we arrange a convenient time to carry out the work.

5. Installation, Testing and Certification
We complete the work, test the installation and provide the correct certification.

Where required, as a NAPIT registered electrician, we also handle Building Control notification through the relevant scheme.

8) Why Homeowners Choose SmartOhm

When you’re searching for an electrician in Leeds, especially for major work like a rewire or consumer unit upgrade, price matters — but so does how the work is done.

We’re not interested in cutting corners to win the cheapest quote.

What we usually recommend is a proper survey first, a clear specification, and a quotation that reflects the work needed.

With SmartOhm, you’re dealing with Craig Wright directly, with 21 years of electrical experience.

We are:

• NAPIT Registered
• Which? Trusted Trader
• Lutron and Rako trained
• Backed by 80+ customer reviews
• Covered by a lifetime workmanship warranty
• Experienced in lived-in rewires
• Used to planning for modern electrical loads

We turn up when we say we will, do what we say we’ll do, and treat your home with respect.

That sounds simple, but on a major job like a rewire, it makes a big difference.

9) What Others Get Wrong

The biggest issue we see is notifiable electrical work being carried out by unregistered or unqualified people.

Rewires and consumer unit upgrades are notifiable work. While the responsibility for notifying Local Authority Building Control technically sits with the homeowner, using a registered electrician through a Competent Person Scheme such as NAPIT means that notification is handled for you.

If this isn’t done properly, it can cause problems later.

You may face extra costs running into hundreds of pounds to regularise the work. It can also cause issues when selling your home, and may create insurance problems if something goes wrong.

Unregistered electricians are not assessed annually in the same way. They do not have to prove they hold the right qualifications, insurance or competencies. They also do not have to demonstrate that they are working to current electrical and building regulations.

The best way to deal with this is to check before work starts.

Use someone registered, insured and able to certify and notify the work correctly.

10) Planning for Modern Homes

Homes now use far more electricity than they used to.

A modern electrical installation may need to support:

• Electric heating
• Home offices
• EV charging
• Smart lighting
• Smart home systems
• Outdoor power
• Garden rooms
• Solar and battery storage
• High-demand kitchen appliances

The West Park rewire is a good example of this. Because the homeowner was moving away from gas, we didn’t just replace old cables like-for-like. We designed the installation around future demand.

In most cases, that’s the better approach.

If you’re rewiring, it makes sense to think ahead rather than wishing you’d added extra sockets, circuits or capacity later.

11) How Much Does a House Rewire Cost?

A typical rewire starts from around £4,000, depending on the size of the property and the specification required.

The final price depends on:

• Number of bedrooms
• Number of sockets and switches
• Lighting design
• Property condition
• Access under floors and through ceilings
• Whether the home is occupied
• Consumer unit requirements
• Additional circuits for heating, EV charging, outdoor power or smart home systems

We provide quotes after a free survey because guessing a rewire price without seeing the property is rarely helpful.

You’ll receive a clear quotation so you can compare properly and understand exactly what is included.

12) Rewires and Consumer Unit Upgrades Near Me

If you’ve been searching for rewires and consumer unit upgrades near me, rewire Leeds, consumer unit upgrade Leeds, or a reliable and trusted electrician for planned electrical work, we can help.

We work across Leeds, Harrogate, Wetherby, Boston Spa and surrounding areas.

Whether you’re renovating, buying an older property, upgrading from an old fuse box or planning a fully electric home, we’ll give you practical advice based on what the property actually needs.

13) What to Expect When You Get in Touch

The first conversation is straightforward.

We’ll ask what you’re planning, where the property is, whether it’s occupied, and whether you need a full rewire, partial rewire or consumer unit upgrade.

From there, we’ll arrange a quote visit and talk through your options clearly.

No pressure. No vague sales pitch. Just honest advice, a proper assessment and a detailed quotation.

14) FAQ SECTION

How much does a house rewire cost in Leeds?
A typical rewire starts from around £4,000, depending on property size and specification. We always quote after a free survey so we can assess the existing installation and give you a realistic price.

Can you rewire a lived-in house?
Yes, we can. We recently rewired a lived-in 4-bedroom semi in West Park, Leeds, using carpet protection, dust protection and correx boards to keep the home safe and tidy while the work was carried out.

Do I need Building Control notification for a rewire?
Yes, rewires and consumer unit upgrades are notifiable work. As a NAPIT registered electrician, we can handle the notification process through the Competent Person Scheme.

How long does a full rewire take?
It depends on the size of the property, access and specification. A lived-in property usually needs more planning because we have to keep the home safe and manage disruption carefully.

What is included in a consumer unit upgrade?
A consumer unit upgrade usually includes replacing the old fuse box, checking the existing installation, fitting suitable protective devices, testing and certification. We’ll confirm the exact requirements after inspecting the property.

Do you provide certification?
Yes. We test and certify the work once completed. Where required, we also notify Building Control through NAPIT.

Do you guarantee the work?
Yes. We provide a lifetime warranty on our workmanship. Product warranties depend on the equipment installed.

15) Contact SmartOhm today!

If you’re planning a rewire, upgrading an old fuse box, or buying a property that needs electrical work, get in touch. We’ll arrange a free survey, give you honest advice and provide a clear quotation so you know exactly where you stand.

Contact us today by phone -  0113 436 0017 or via our contact form.